ALK 02 - GENERAL PURPOSE DOOR FORCE AND CEILING LIGHTING LAMPS

General Info

It is usually used for the hard working enviorement, such as if there is a possibility to receive hit and shocks, like over the opening doors, bagages, e.t.c. Water resistant and various colors of leds are avaliable such as white, red, green, yellow.

Technical Specs

Power Source: 24V DC (12V DC avaliable.)
Cable Lenght: 220 mm
Up on request various types of sockets can install.


ALB 01 - STAIR AND GENERAL PURPOSE LED LIGHT

General Info

It is used for the general lighting purposes. It requires a sectional cut over to surface to fit in. Water resistant and various colors of leds are avaliable white, red, green, yellow.

Technical Specs

Power Source: 24V DC (12 V DC avaliable.)
Cable Lenght: 730 mm
Up on request various types of sockets can install.


ALB 08 - SMALL STAIR AND GENERAL PURPOSE LIGHT

General Info

It is used for the less general lighting purposes. It requires a sectional cut over to surface to fit in. Water resistant and various colors of leds are avaliable white, red, green, yellow. It commonly used items, clould be use just about at any where you need a light.

Technical Specs

Power Source: 24V DC (12V DC avaliable.)
Cable Lenght: 730 mm
Up on request various types of sockets can install.


ALB 10 - ROUND LED LIGHT

General Info

Round type LED light. It is usually used decorative purpose or where is a little light consumption is required. Variety of LED colors are avaliable up on customer request.

Technical Specs

Power Source: 24V DC (12V DC avaliable.)
Cable Lenght: 220 mm
Up on request various types of sockets can install.


ALB 11 - CORRIDOR LIGHTNINGS

General Info

The lamp is manufactured with LED diots. Lamps require low power

Technical Specs

Power Source: 24V DC (12V DC avaliable.)


ALT 02 - INTERIOR LIGHTS

General Info

General purpose of lighting for small and mid size buses and trucks. The light could be control manually by switch which locate a side at the driver. The number of the LED unit is used could be changed according to customer demand depenting the amount of light is need. Variety of led colors are avaliable up on customer request.

Technical Specs

Power Source: 24V DC (12V DC avaliable.)
Cable Lenght: 220 mm
Up on request various types of sockets can install.


ALT 01 - CABIN INTERIOR LIGHT WITH 3 STEP SWITCH

General Info

It is used for the general purpose of the lighting in the car or trucks. The switch has 3 step function, ON/OFF and finally OPEN ON mode. When the lamps is remains on OPEN ON mode,if passanger opens the door of the vehicle lamps get ON, if the passanger closes the door the lamps get OFF.

Technical Specs

Power Source: 24V DC (12V DC avaliable.)


ALJ 03 - LED FIELD LIGHT

General Info

It usually used for the general lighting purposes in the need sizes vehicles. In the travel buses they prefer to use in the bagages. There is 30 units of LED used in the lamp. There is special design made over the lens of the lamp so that illumunation could be in wider angle.12 - 24 volts are avaliable.

Technical Specs

Power Source: 24V DC (12V DC avaliable.)
Cable Lenght: 220 mm
Up on request various types of sockets can install.


ALJ 02 - FIELD LIGHT

General Info

Minibüslerin orta mekanlarında genel aydınlatma amaçlı kullanılan bir ledli lambadır. Büyük seyahat araçlarının bagaj aydınlatmasında da kullanılır. 60 adet led mevcuttur. 120 derece içinde kalan her yeri aydınlatır. Cam üzerindeki deseni sayesinde aydınlatmanın geniş alana yayılması sağlanmıştır.

Technical Specs

Power Source: 24V DC (12V DC avaliable.)
Cable Lenght: 220 mm
Up on request various types of sockets can install.


ALJ 03 - FIELD LIGHT WITH SWITCH

General Info

It usually used for the general lighting purposes in the need sizes vehicles. In the travel buses they prefer to use in the bagages. There is 60 units of LED used in the lamp. There is special design made over the lens of the lamp so that illumunation could be in wider angle. There is a 3 function switch is on board over the lamp. Becides ON/OFF functions, switching to the night mode will set the red leds on.

Technical Specs

Power Source: 24V DC (12V DC avaliable.)
Cable Lenght: 220 mm
Up on request various types of sockets can install.


ALM 01 - ENGINE LIGHTING

General Info

It is used in the engine of the vehicle. The lamp is design to operate under the high temperature value, it why LED used in the product. It is also perform very well under the vibrate enviorement. It is water resistant. The size of the lamp kept small so that it can fit any where in the engine room. More then one lamp is recommended to use for each engine room.

Technical Specs

Power Source: 24V DC (12V DC avaliable.)
Cable Lenght: 150 mm
Up on request various types of sockets can install.


KÖA - FRONT DOOR LIGHT

General Info

Led system products. Since it draws very low current, it uses battery energy is decreasing. It is generally used as front door lighting. It is an auxiliary light source for passengers getting in or out to the vehicle in the dark.

Technical Specs

Power Source: 24V DC (12V DC avaliable.)
Up on request various types of sockets can install.


ALK01 - GENERAL PURPOSE SURFACE MOUNTED TYPE WITH SWITCH LED LIGHT

General Info

It is used in where you feel to switch the light manually, such as the fuse cabin, interior aplication, and bagages so on. Double colors light are avabliable, furthemore various colors of leds are avaliable such as white, red, green, yellow. It is easy to apply to the surface of the any where, no need sectional cut, 2 screw is enough to fix.

Technical Specs

Supply Voltage: 24 VDC (12 VDC is done) Power Source: 24 VDC (12 VDC Avalliable) Cable Length : 220 mm Cable Length: 220 mm Socket is installed according to customer request. Up on request various types of sockets can install


ULE05 - CEILING LIGHTING

General Info

3.rd Brake lamp is manufacture with LEDs, as reult consume very little current, thus battery of the vehicle can last longer. No need cut any section over the vehicle, could be adapted over the surface of the vehicle by the use of 2 screws. The lamps very slim and decorative.Higher numbers of SMD types of LEDs are used, as s result when the lamps is on light could be seen as straight line.

Technical Specs


ALT11 - LED CONTINUOUS LAMP

General Info

Technical Specs


ALT1 - LED CONTINUOUS LAMP

General Info

Preferably used for the city bus lightings. The lamp has several advantages, forexample there is a on board fixture line is existing on the lamp to fix the passanger holding pipes.There is also 2 more fixture lines exist at the both sides of the lamps. We can use one side to insert the roof covers, and other side could be use to insert the side covers in.This makes the lamp a multifuctional unit where it combines all other separete parts all together.The light could be observed in the homogen form, and containes sevaral numbers of LED module cards. If any one of this LED module is having trouble, it is very easy to service. The amount of light is coming out off the lamp is determined according to world standarts, city buses, 100 lux at the seats. Up on customer request different colors or combination colors of LEDs could be board into the lamp

Technical Specs