General Info

Mounting with two suitable screws is offered to the front and vertical holding posts. STOP button on body should be above direction. The bottom double-charging unit opens up the sliding flap and connects to the USB socket of the device that needs to be charged. This flap goes down automatically when the USB charge is removed and turns off the charging unit. Thus, the open forgetting event is lifted and this unit is protected against Vandal use. There are 2 green LEDs for two eyes,indicating that the devices plugged in here are charging for charging. These LEDs only light up when the charger is plugged in. STOP BUTTON is a sensitive button type that works with soft contact. The electrical connections are made through the cable outlets located between the two screw holes on the mast.

General Info

It is mounted to the foreseen and vertical holding posts with two suitable screws and offered for use. The direction of the usb logo on the body should be up. The device that needs to be charged is connected to the USB sockets by opening the sliding cover of the double compartment charging unit at the bottom. This flap automatically goes down when the charging USBs are removed and closes the charging unit. Thus, the event of forgetting is eliminated and this unit is protected against vandal uses. There are 2 separate green LEDs for the two eyes, indicating that the devices inserted here for charging are charging. These LEDs

General Info

It is used in the various areas of the vehicle. Fast charger unit.

General Info

It is used in the various areas of the vehicle. Fast charger unit.

General Info

The interior USB charger is easy to use and apply, which can be attached to the places most suitable for use of passengers. In terms of performance, it falls into the category of fast charging units. Voltage output next to the charger is avaliable, you can easily use the appropriate socket type to draine electricity from this plug.