General Info

* It is in the category of dynamic types of buttons. It is operating with a single touch to the surface of the button applied by the handicap passengers. Electronic component embedded into the plastic cell, thus button become water resistant.
* In terms of switching capabilitybutton can function life time long. There is no mechanical operation take place in the buttons, as a result there is no maintenance is required. 24,7 cm2 surface area is set as capacitive sensitive section.

General Info

Button can be installed over the flat surface of anywhere on the bus or vehicle Variety of colors are available for the body and push side of the buttons, customer can select any colors from the RAL catalog.

General Info

Mounting with two suitable screws is offered to the front and vertical holding posts. STOP button on body should be above direction. The bottom double-charging unit opens up the sliding flap and connects to the USB socket of the device that needs to be charged. This flap goes down automatically when the USB charge is removed and turns off the charging unit. Thus, the open forgetting event is lifted and this unit is protected against Vandal use. There are 2 green LEDs for two eyes,indicating that the devices plugged in here are charging for charging. These LEDs only light up when the charger is plugged in. STOP BUTTON is a sensitive button type that works with soft contact. The electrical connections are made through the cable outlets located between the two screw holes on the mast.

General Info

Button can be installed to 30-35 mm pipes by the use of special adapter which is available in our product list. Variety of colors are available for the body and push side of the buttons, customer can select any colors from the RAL catalog. Different signs and figures can be placed on the push side of the buttons such as, STOP sign in the blind alphabet and some other figure and characters. 3mm push buttons are off of the surface to help the handicaps to easily push the buttons.

General Info

Mechanical switch, when you press buton switch gets ON until your release buton. It is durable to rain and dust, thus can be use at our side of the vehicle. Due to the mechanical structure, high volume of current can pass over the switch.

General Info

Electronicly switchcing on and off buton type. As soon as you press, the signal remains ON until, you relase the buton. It is often used at the trucktors sectors. It is used specialy at the out sides of the vehicles, because it is durable to dust and rain.

General Info

It is used in surface mounted applications.

Technical Specs

General Info

-Electronicly switching on and off buton type. As soon as you press, the signal remains ON until, you relasethe buton. When you press the second buton does the opposite reaction. It is often used at the trucktors sectors. It is used specialy at the out sides of the vehicles, because it is dureable to dust and rain.

Technical Specs

General Info

Technical Specs

General Info

Technical Specs